Glass straight edge edging machine (BSK272E )

BSK272E feature configuration is introduced

BSK272E is an 11-head glass straight line edging machine, which is mainly used for grinding and polishing the bottom edge and edges of flat glass of different sizes and thicknesses. The rough and fine grinding and polishing of the bottom edge and the rough and fine grinding of the edges and corners are processed at one time, and the polishing brightness is good. The design is reasonable and advanced, the debugging is convenient and simple, and it is easy to operate, and the main drive of this machine adopts frequency conversion speed regulation, and the main drive can be directly adjusted on the control panel when adjusting. This machine can meet the requirements of different thicknesses and sizes and different grades of glass processing, and the thickness of the processed glass is electrically adjusted.

Advanced Features & Configurations:

1. The main drive is frequency conversion speed regulation;
2. Digital display of glass thickness, electric adjustment;
3. The grinding head slide plate is equipped with a dovetail slide plate as standard, and the dovetail grinding head holder plate: high-quality cast iron, professional pairing processing, no gap, stable and vibration during work. It is equipped with manual refueling function for easy maintenance.
4. The last bottom polishing motor machine 4/2 stage two-speed grinding head motor
5. The 4-layer brush is waterproof and easy to replace
6. Advanced configuration of front beam in and out: exclusive design of linear supporting plate, easier to replace and maintain.
7. Front and rear guide rails: high-quality cast iron, not easy to deform.
8. Bed, column: high-quality cast iron, (non-steel plate welding)

Grinding wheel configuration:

BSK272E main technical parameters:

(1) Dimensions (length× width× height): 7000mm× 1000mm×2600mm
(2) Table height: 760mm
(3) Total weight: 3600kg
(4) Voltage: three-phase four-wire 380V 50Hz
(5) Total power: 22KW
(6) Speed range: 0.6~5m/min stepless adjustable
(7) Processing parameters:
Maximum grinding amount of bottom edge: 3mm
Maximum grinding width of edges and corners: 2.5mm
Minimum size of processed glass: 80mm×80mm×3mm
Processed glass thickness: 3~30mm